Future
LHS110013 ,  Industrial Milling Machine Motor Controller

LHS110013 , The standard voltage AC110V / AC220V System
Motor standard : 8 poles
Servo control
Control IC model / SSOP20 : LHS11013

The phase of 120 degree angle Hall-effect sensor
LHS11013 Overcurrent protection is temporarily released, it is recommended to use no more than 10A
The motor stops immediately when the motor is turned off
Forward rotation/reverse rotation switch controls motor start and stop
The brake switch is an emergency stop switch and needs to be restarted to release
After the forward/reverse switch is turned on, the speed is controlled by an external 5V VR to start and stop
If the difference between the preset speed of the program and the actual speed exceeds the range, it will be regarded as a stall and enter the protection.
The maximum speed button is set to exceed the VR maximum speed
Phase detecting protection
Power LED , Alarm LED , Motor runnung LED

For other functions and protections, please refer to the LHS11013 user manual
Silicone insulating heat sink : Num. 27